Mini attachments

Sorting bucket

For separation of all kinds of rough and fine materials. MSL model for mini excavators with plasma-cutting base, CSL model with bottom made of massive rectangular bars.

Robust bucket design with versions for mini excavators (MSL)
Burnt out perforated plate made of 400HB steel, hole spacing approx. 40 mm
Blades made of Lehborit 5000 (500HB)
Drop-forged, hardened Lehnhoff tooth system

Technical data sorting bucket MSL

	MSL 3	MSL 4	MSL 6
Excavator class	2,6 - 3,5 t	3,5 - 5,0 t	4,8 - 6,0 t
Cutting width	SAE / KG	SAE / KG	SAE / KG
600 / 4 Z	127 / 90	162 / 100
700 / 5 Z	150 / 108
800 / 5 Z		230 / 120	250 / 125
1000 / 5 Z			320 / 143
Tooth system	400F	400F	400F

Cutting width (mm), Z = teeth, SAE = capacity (l), KG = weight (kg)

Grading bucket

ideal for use on rotators/tilt rotators

With an extensively contorted blade, double-conical side walls and optimal trapeze design, the Lehnhoff profile buckets are ideal for levelling and digging work.

Tapered edges
Long flat bottom and double-conical design
Thus optimum penetration characteristics and fuel saving
Efficient emptying

Technical data grading bucket

	MP 4
Excavator class	3,0 - 6,0 t
Cutting width	SAE / KG
1000	42 / 62
1300	200 / 117

SAE = capacity (l), KG = weight (kg)

Bionic ripper tooth

The bionically optimised ripping teeth from Lehnhoff stand for efficiency and stability when tearing and loosening rock, stone and soils. With welded tooth tip. And with Lehmatic adapter. Ideal for:

Loosening of hard or frozen grounds
Demolition work
Loosening of stone and rock
Breaking up road surfaces and concrete slabs
Clearing work

Technical data bionic ripper tooth

	MRZ 1	MRZ 3	MRZ 6
Excavator class	- 1,8 t	1,8 - 3,5 t	3,5 - 6,0 t
Suspension	SW 01	SW 03	SW 03
Tooth radius (mm)	500	550	650
Weight (kg)	32	60	63

Pallet fork

Enables the handling of loads on common pallets with adjustable fork arms.

In different sizes for 1.8 - 4 t load capacity
Lehmatic adapter SW03

Technical data pallet fork

	MPG 5
Excavator class	5 - 6 t
Suspension	SW 03
Width (mm)	1100
Fork arms (mm)	1200x100x45
Weight (kg)	251
Load capacity (t)	1,8

Demolition and sorting grap

The Lehnhoff demolition and sorting grab are suitable for sorting, loading, and placing stones and for gripping wood. Featuring a very robust and compact design as well as large opening width and shell volume, and with impressive high clamping, rotation and holding forces.

Rotation angle 360° continuous
Robust design for long service life
Replaceable screw blade
Easy to maintain: all lubrication points are accessible in one position
Special shells are available on request
Also available without the turning head (for rotators/tilt rotators)
Optionally with Lehmatic or Variolock adapter

Technical data demolition and sorting grab

	MSG 3	MSG 6
Excavater class	2,6 - 5 t	4,8 - 6 t
Opening dimensions (mm)	1137	1350
Shell width (mm)	650	650
Height without adapter (mm)	703	975
Clamping force (kN)	12	26
Weight incl. adapter	240	455
Capacity (l)	100	140
Operating pressure (bar)	320	320
Operating pressure rotation (bar)	120	120
Oil flow (l/min)	35	50
Oil flow rotating (l/min)	20	20